Spider High Tensile Wire
16-gauge High Tensile, extra heavily galvanized steel.  200,000 PSI, min. 600lbs. breaking strength; designed for electrification. 14" ID coil. 25 rolls per skid. 3000' coil.

Spider Line Posts  
Fiberglass rods designed for maximum strength and longevity.  These high quality rods have the unique feature of not depositing splinters of fiberglass in your hands as you install the posts.

Spider Footed Posts
Designed to prevent upward lift of wire from pulling the post out of the ground on a dip. They are equipped with wire barbs that when bent and driven 8" past the desired depth and pulled back up to the desired height, will mushroom out and secure themselves into the ground.  

Spider Post Pounder
Steel hammer sleeve for hand driving of fiberglass rods.  

Nylon Driving Cap
Nylon protector cap for driving fiberglass posts or offset rods; allows post to be driven with a hammer.  

Master Tread-In Post
Fiberglass step-in post used when moving animals frequently.  Designed with one Double Wedge Clip, tough, super gripping collet and treadstep, and steel pin. 

Double Wedge Clip
Perhaps the most vital link in the Spider Fence is the point where the fiberglass and the wire meet. The clip is self-locking in both directions, but is easily adjustable with a Double Wedge Clip Applicator. 

G Spring w/ Plug and Insert
This unit is a wire tensioner, cutout switch and gate hook.  Plug and Insert is the electrical connection socket for the G Spring. 

Tie Back Hook
Wire form and handle designed for quick attachment onto a wire to provide a second anchorage point for the G Spring. 

HOME    EQUINE    FENCING    CATTLE     SCALES    FEEDING    WATERING    HEATED   
HOSES/REELS    PORT-A-HUT   OUTDOOR COOKING   VIEW CART

Site designed and hosted by EquineSite.com